| HugePage介绍、实现分析、配置和使用 | 您所在的位置：网站首页 › how to check transparent hugepage status disabled or › HugePage介绍、实现分析、配置和使用 |
HugePage介绍、实现分析、配置和使用
|
关键词：TLB、hugetlb、hugetlbfs、mmap、shmget/shmat、nr_hugepages等等。
测试环境：Ubuntu 16.04+Linux 4.15.0-123-generic。 1. HugePage介绍Linux内存管理采用“分页机制”，内存页面默认大小为4KB。但是当运行内存需求量较大时，默认4KB大小的页面会导致较多的TLB miss和缺页中断，从而大大影响应用程序性能。 但是直接修改Linux内核页面大小，涉及面较广，不一定合适。为了以最小代价实现大页面支持，Linux采用了hugetlbfs特殊文件系统。这种文件系统形式支持大页面，使得应用程序可以根据需要灵活地选择虚拟内存页面大小，而不会被强制使用2MB大小页面。 使用HugePage需要内核中打开CONFIG_HUGETLB_PAGE以及CONFIG_HUGETLBFS。 Page Table:页表，也就是一种用于内存管理的实现方式，用于物理地址到逻辑地址之间的映射。因此对于内存的访问，先是访问Page Table，然后根据Page Table中的映射关系，隐式的转移到物理地址来存取数据。 TLB: Translation Lookaside Buffer (TLB) ，是虚拟地址到物理地址转换cache，包含了部分page table的映射关系，用于快速实现虚拟地址到物理地址的转换。 hugetlb: hugetlb 是TLB中指向HugePage的一个入口。 用户可以通过mmap或者SYSV共享内存(shmget/shmat)来使用HugePage。 内核中预留给HugePage的内存不能被其他功能复用。并且是不保证物理连续的。
HugePage的应用涉及到两方面：内核使用HugeTLB对HugePage进行应设管理；使用hugetlbfs来提供为文件系统给用户空间访问。 2.1 HugeTLB初始化 2.1.1 数据结构全局数组hstates中每一个struct hstate相当于一个Huge Page池，不同的成员，其页面大小是不一样的。 hugetlb_max_hstate表示当前成员数量，HUGE_MAX_HSTATE表示系统支持最多struct hstate数量。 struct hstate hstates[HUGE_MAX_HSTATE]; /* Defines one hugetlb page size */ struct hstate { int next_nid_to_alloc; int next_nid_to_free; unsigned int order; unsigned long mask; unsigned long max_huge_pages; unsigned long nr_huge_pages; unsigned long free_huge_pages; unsigned long resv_huge_pages; unsigned long surplus_huge_pages; unsigned long nr_overcommit_huge_pages; struct list_head hugepage_activelist; struct list_head hugepage_freelists[MAX_NUMNODES]; unsigned int nr_huge_pages_node[MAX_NUMNODES]; unsigned int free_huge_pages_node[MAX_NUMNODES]; unsigned int surplus_huge_pages_node[MAX_NUMNODES]; #ifdef CONFIG_CGROUP_HUGETLB /* cgroup control files */ struct cftype cgroup_files[5]; #endif char name[HSTATE_NAME_LEN]; }; 2.1.2 Huge Page TLB初始化hugetlb_init()是Huge Page初始化入口，属于subsys_initcall()，在arch_initcall()之后，fs_initcall()之前。 static int __init hugetlb_init(void) { int i; if (!hugepages_supported()) return 0; if (!size_to_hstate(default_hstate_size)) {-------------------------------如果通过command line设置了default_hugepagesz则跳过；否则使用系统默认的HPAGE_SIZE作为默认Huge Page大小。 if (default_hstate_size != 0) { pr_err("HugeTLB: unsupported default_hugepagesz %lu. Reverting to %lu\n", default_hstate_size, HPAGE_SIZE); } default_hstate_size = HPAGE_SIZE; if (!size_to_hstate(default_hstate_size)) hugetlb_add_hstate(HUGETLB_PAGE_ORDER); } default_hstate_idx = hstate_index(size_to_hstate(default_hstate_size));---默认Huge Page在hstates中对应索引号。 if (default_hstate_max_huge_pages) { if (!default_hstate.max_huge_pages) default_hstate.max_huge_pages = default_hstate_max_huge_pages; } hugetlb_init_hstates();---------------------------------------------------根据当前hstate->order，初始化order小于MAX_ORDER的Huge Page内存池。较大的部分在之前已经进行分配。 gather_bootmem_prealloc(); report_hugepages();-------------------------------------------------------输出当前系统支持的不同Huge Page大小以及分配页数。 hugetlb_sysfs_init();-----------------------------------------------------在/sys/kernel/mm/hugepages目录下针对不同大小的Huge Paeg创建目录。 hugetlb_register_all_nodes();---------------------------------------------处理NUMA架构下不同node的Huge Page。 hugetlb_cgroup_file_init();-----------------------------------------------创建/sys/fs/cgroup/hugetlb下节点：hugetlb.2MB.failcnt、hugetlb.2MB.limit_in_bytes、hugetlb.2MB.max_usage_in_bytes、hugetlb.2MB.usage_in_bytes。 #ifdef CONFIG_SMP num_fault_mutexes = roundup_pow_of_two(8 * num_possible_cpus()); #else num_fault_mutexes = 1; #endif hugetlb_fault_mutex_table = kmalloc(sizeof(struct mutex) * num_fault_mutexes, GFP_KERNEL); BUG_ON(!hugetlb_fault_mutex_table); for (i = 0; i < num_fault_mutexes; i++) mutex_init(&hugetlb_fault_mutex_table[i]);----------------------------创建hugetlb mutex。 return 0; } void __init hugetlb_add_hstate(unsigned int order) { struct hstate *h; unsigned long i; if (size_to_hstate(PAGE_SIZE = HUGE_MAX_HSTATE); BUG_ON(order == 0); h = &hstates[hugetlb_max_hstate++];------------------------设置hstates中对应Huge Page池属性。 h->order = order; h->mask = ~((1ULL nr_huge_pages = 0; h->free_huge_pages = 0; for (i = 0; i < MAX_NUMNODES; ++i) INIT_LIST_HEAD(&h->hugepage_freelists[i]); INIT_LIST_HEAD(&h->hugepage_activelist); h->next_nid_to_alloc = first_memory_node; h->next_nid_to_free = first_memory_node; snprintf(h->name, HSTATE_NAME_LEN, "hugepages-%lukB", huge_page_size(h)/1024); parsed_hstate = h; }hugetlb_sysfs_init()对不同大小的Huge Page创建/sys/kernel/mm/hugepages对应的目录，对每个目录中属性节点进行配置达到配置Huge Page池的目的。 static void __init hugetlb_sysfs_init(void) { struct hstate *h; int err; hugepages_kobj = kobject_create_and_add("hugepages", mm_kobj); if (!hugepages_kobj) return; for_each_hstate(h) { err = hugetlb_sysfs_add_hstate(h, hugepages_kobj, hstate_kobjs, &hstate_attr_group); if (err) pr_err("Hugetlb: Unable to add hstate %s", h->name); } } static int hugetlb_sysfs_add_hstate(struct hstate *h, struct kobject *parent, struct kobject **hstate_kobjs, const struct attribute_group *hstate_attr_group) { int retval; int hi = hstate_index(h); hstate_kobjs[hi] = kobject_create_and_add(h->name, parent); if (!hstate_kobjs[hi]) return -ENOMEM; retval = sysfs_create_group(hstate_kobjs[hi], hstate_attr_group); if (retval) kobject_put(hstate_kobjs[hi]); return retval; } static const struct attribute_group hstate_attr_group = { .attrs = hstate_attrs, }; static struct attribute *hstate_attrs[] = { &nr_hugepages_attr.attr, &nr_overcommit_hugepages_attr.attr, &free_hugepages_attr.attr, &resv_hugepages_attr.attr, &surplus_hugepages_attr.attr, #ifdef CONFIG_NUMA &nr_hugepages_mempolicy_attr.attr, #endif NULL, };修改nr_hugepaegs对Huge Page页面数进行配置，核心是set_max_huge_pages()。 static ssize_t nr_hugepages_show_common(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { struct hstate *h; unsigned long nr_huge_pages; int nid; h = kobj_to_hstate(kobj, &nid); if (nid == NUMA_NO_NODE) nr_huge_pages = h->nr_huge_pages; else nr_huge_pages = h->nr_huge_pages_node[nid]; return sprintf(buf, "%lu\n", nr_huge_pages); } static ssize_t __nr_hugepages_store_common(bool obey_mempolicy, struct hstate *h, int nid, unsigned long count, size_t len) { int err; NODEMASK_ALLOC(nodemask_t, nodes_allowed, GFP_KERNEL | __GFP_NORETRY); if (hstate_is_gigantic(h) && !gigantic_page_supported()) { err = -EINVAL; goto out; } if (nid == NUMA_NO_NODE) { /* * global hstate attribute */ if (!(obey_mempolicy && init_nodemask_of_mempolicy(nodes_allowed))) { NODEMASK_FREE(nodes_allowed); nodes_allowed = &node_states[N_MEMORY]; } } else if (nodes_allowed) { /* * per node hstate attribute: adjust count to global, * but restrict alloc/free to the specified node. */ count += h->nr_huge_pages - h->nr_huge_pages_node[nid]; init_nodemask_of_node(nodes_allowed, nid); } else nodes_allowed = &node_states[N_MEMORY]; h->max_huge_pages = set_max_huge_pages(h, count, nodes_allowed); if (nodes_allowed != &node_states[N_MEMORY]) NODEMASK_FREE(nodes_allowed); return len; out: NODEMASK_FREE(nodes_allowed); return err; } static ssize_t nr_hugepages_store_common(bool obey_mempolicy, struct kobject *kobj, const char *buf, size_t len) { struct hstate *h; unsigned long count; int nid; int err; err = kstrtoul(buf, 10, &count); if (err) return err; h = kobj_to_hstate(kobj, &nid); return __nr_hugepages_store_common(obey_mempolicy, h, nid, count, len); } static ssize_t nr_hugepages_show(struct kobject *kobj, struct kobj_attribute *attr, char *buf) { return nr_hugepages_show_common(kobj, attr, buf); } static ssize_t nr_hugepages_store(struct kobject *kobj, struct kobj_attribute *attr, const char *buf, size_t len) { return nr_hugepages_store_common(false, kobj, buf, len); } HSTATE_ATTR(nr_hugepages); #define persistent_huge_pages(h) (h->nr_huge_pages - h->surplus_huge_pages) static unsigned long set_max_huge_pages(struct hstate *h, unsigned long count, nodemask_t *nodes_allowed) { unsigned long min_count, ret; if (hstate_is_gigantic(h) && !gigantic_page_supported()) return h->max_huge_pages; /* * Increase the pool size * First take pages out of surplus state. Then make up the * remaining difference by allocating fresh huge pages. * * We might race with __alloc_buddy_huge_page() here and be unable * to convert a surplus huge page to a normal huge page. That is * not critical, though, it just means the overall size of the * pool might be one hugepage larger than it needs to be, but * within all the constraints specified by the sysctls. */ spin_lock(&hugetlb_lock); while (h->surplus_huge_pages && count > persistent_huge_pages(h)) { if (!adjust_pool_surplus(h, nodes_allowed, -1)) break; } while (count > persistent_huge_pages(h)) { /* * If this allocation races such that we no longer need the * page, free_huge_page will handle it by freeing the page * and reducing the surplus. */ spin_unlock(&hugetlb_lock); /* yield cpu to avoid soft lockup */ cond_resched(); if (hstate_is_gigantic(h)) ret = alloc_fresh_gigantic_page(h, nodes_allowed); else ret = alloc_fresh_huge_page(h, nodes_allowed); spin_lock(&hugetlb_lock); if (!ret) goto out; /* Bail for signals. Probably ctrl-c from user */ if (signal_pending(current)) goto out; } /* * Decrease the pool size * First return free pages to the buddy allocator (being careful * to keep enough around to satisfy reservations). Then place * pages into surplus state as needed so the pool will shrink * to the desired size as pages become free. * * By placing pages into the surplus state independent of the * overcommit value, we are allowing the surplus pool size to * exceed overcommit. There are few sane options here. Since * __alloc_buddy_huge_page() is checking the global counter, * though, we'll note that we're not allowed to exceed surplus * and won't grow the pool anywhere else. Not until one of the * sysctls are changed, or the surplus pages go out of use. */ min_count = h->resv_huge_pages + h->nr_huge_pages - h->free_huge_pages; min_count = max(count, min_count); try_to_free_low(h, min_count, nodes_allowed); while (min_count s_fs_info = sbinfo; sbinfo->hstate = config.hstate; spin_lock_init(&sbinfo->stat_lock); sbinfo->max_inodes = config.nr_inodes; sbinfo->free_inodes = config.nr_inodes; sbinfo->spool = NULL; sbinfo->uid = config.uid; sbinfo->gid = config.gid; sbinfo->mode = config.mode; /* * Allocate and initialize subpool if maximum or minimum size is * specified. Any needed reservations (for minimim size) are taken * taken when the subpool is created. */ if (config.max_hpages != -1 || config.min_hpages != -1) { sbinfo->spool = hugepage_new_subpool(config.hstate, config.max_hpages, config.min_hpages); if (!sbinfo->spool) goto out_free; } sb->s_maxbytes = MAX_LFS_FILESIZE; sb->s_blocksize = huge_page_size(config.hstate); sb->s_blocksize_bits = huge_page_shift(config.hstate); sb->s_magic = HUGETLBFS_MAGIC; sb->s_op = &hugetlbfs_ops; sb->s_time_gran = 1; sb->s_root = d_make_root(hugetlbfs_get_root(sb, &config)); if (!sb->s_root) goto out_free; return 0; out_free: kfree(sbinfo->spool); kfree(sbinfo); return -ENOMEM; } static const struct super_operations hugetlbfs_ops = { .alloc_inode = hugetlbfs_alloc_inode, .destroy_inode = hugetlbfs_destroy_inode, .evict_inode = hugetlbfs_evict_inode, .statfs = hugetlbfs_statfs, .put_super = hugetlbfs_put_super, .show_options = hugetlbfs_show_options, }; static const struct inode_operations hugetlbfs_dir_inode_operations = { .create = hugetlbfs_create, .lookup = simple_lookup, .link = simple_link, .unlink = simple_unlink, .symlink = hugetlbfs_symlink, .mkdir = hugetlbfs_mkdir, .rmdir = simple_rmdir, .mknod = hugetlbfs_mknod, .rename = simple_rename, .setattr = hugetlbfs_setattr, }; static const struct inode_operations hugetlbfs_inode_operations = { .setattr = hugetlbfs_setattr, }; const struct file_operations hugetlbfs_file_operations = {--------------可以看出hugetlbfs文件系统中文件只支持read/mmap/ummap等操作，不支持write。 .read_iter = hugetlbfs_read_iter, .mmap = hugetlbfs_file_mmap, .fsync = noop_fsync, .get_unmapped_area = hugetlb_get_unmapped_area, .llseek = default_llseek, .fallocate = hugetlbfs_fallocate, }; 2.3 mmap和shmget/shmat用户空间在hugetlbfs文件系统创建文件，或者使用MAP_HUGETLB属性时，在mmap系统调用中执行如下操作： SYSCALL_DEFINE6(mmap_pgoff, unsigned long, addr, unsigned long, len, unsigned long, prot, unsigned long, flags, unsigned long, fd, unsigned long, pgoff) { struct file *file = NULL; unsigned long retval; if (!(flags & MAP_ANONYMOUS)) {-----------------------------------有名文件映射。 audit_mmap_fd(fd, flags); file = fget(fd); if (!file) return -EBADF; if (is_file_hugepages(file))----------------------------------如果是hugetlbfs文件系统文件，将文件大小对齐到页面大小。 len = ALIGN(len, huge_page_size(hstate_file(file))); retval = -EINVAL; if (unlikely(flags & MAP_HUGETLB && !is_file_hugepages(file))) goto out_fput; } else if (flags & MAP_HUGETLB) {--------------------------------匿名Huge Page映射。 struct user_struct *user = NULL; struct hstate *hs; hs = hstate_sizelog((flags >> MAP_HUGE_SHIFT) & MAP_HUGE_MASK); if (!hs) return -EINVAL; len = ALIGN(len, huge_page_size(hs));------------------------大小对齐到Huge Page大小。 /* * VM_NORESERVE is used because the reservations will be * taken when vm_ops->mmap() is called * A dummy user value is used because we are not locking * memory so no accounting is necessary */ file = hugetlb_file_setup(HUGETLB_ANON_FILE, len, VM_NORESERVE, &user, HUGETLB_ANONHUGE_INODE, (flags >> MAP_HUGE_SHIFT) & MAP_HUGE_MASK);----------创建文件，使用hugetlbfs_file_operations作为操作函数集。 if (IS_ERR(file)) return PTR_ERR(file); } flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE); retval = vm_mmap_pgoff(file, addr, len, prot, flags, pgoff);----调用hugetlbfs的mmap函数hugetlbfs_file_mmap()进行映射。 out_fput: if (file) fput(file); return retval; }当使用SysV共享内存进行Huge Page映射时： static int newseg(struct ipc_namespace *ns, struct ipc_params *params) { key_t key = params->key; int shmflg = params->flg; size_t size = params->u.size; int error; struct shmid_kernel *shp; size_t numpages = (size + PAGE_SIZE - 1) >> PAGE_SHIFT; struct file *file; char name[13]; vm_flags_t acctflag = 0; ... sprintf(name, "SYSV%08x", key); if (shmflg & SHM_HUGETLB) { struct hstate *hs; size_t hugesize; hs = hstate_sizelog((shmflg >> SHM_HUGE_SHIFT) & SHM_HUGE_MASK);--------Huge Page页面大小对齐。 if (!hs) { error = -EINVAL; goto no_file; } hugesize = ALIGN(size, huge_page_size(hs)); /* hugetlb_file_setup applies strict accounting */ if (shmflg & SHM_NORESERVE) acctflag = VM_NORESERVE; file = hugetlb_file_setup(name, hugesize, acctflag, &shp->mlock_user, HUGETLB_SHMFS_INODE, (shmflg >> SHM_HUGE_SHIFT) & SHM_HUGE_MASK);---------------------创建hugetlbfs文件。 } else { ... } error = PTR_ERR(file); if (IS_ERR(file)) goto no_file;... }内存映射在do_shmat()中进行： static const struct file_operations shm_file_operations_huge = { .mmap = shm_mmap, .fsync = shm_fsync, .release = shm_release, .get_unmapped_area = shm_get_unmapped_area, .llseek = noop_llseek, .fallocate = shm_fallocate, }; long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr, unsigned long shmlba) { struct shmid_kernel *shp; unsigned long addr = (unsigned long)shmaddr; ... file = alloc_file(&path, f_mode, is_file_hugepages(shp->shm_file) ? &shm_file_operations_huge : &shm_file_operations); ... addr = do_mmap_pgoff(file, addr, size, prot, flags, 0, &populate, NULL);----调用shm_mmap()进行映射。 ... } 2.4 HugePage缺页异常do_page_fault()是系统处理缺页异常的入口，如果是Huge Page类型的缺页异常则调用hugetlb_fault()进行处理。 do_page_fault ->__do_page_fault ->handle_mm_fault int handle_mm_fault(struct vm_area_struct *vma, unsigned long address, unsigned int flags) { ... if (unlikely(is_vm_hugetlb_page(vma))) ret = hugetlb_fault(vma->vm_mm, vma, address, flags); else ret = __handle_mm_fault(vma, address, flags); ... } int hugetlb_fault(struct mm_struct *mm, struct vm_area_struct *vma, unsigned long address, unsigned int flags) { pte_t *ptep, entry; spinlock_t *ptl; int ret; u32 hash; pgoff_t idx; struct page *page = NULL; struct page *pagecache_page = NULL; struct hstate *h = hstate_vma(vma); struct address_space *mapping; int need_wait_lock = 0; address &= huge_page_mask(h); ptep = huge_pte_offset(mm, address, huge_page_size(h)); if (ptep) { entry = huge_ptep_get(ptep); if (unlikely(is_hugetlb_entry_migration(entry))) { migration_entry_wait_huge(vma, mm, ptep); return 0; } else if (unlikely(is_hugetlb_entry_hwpoisoned(entry))) return VM_FAULT_HWPOISON_LARGE | VM_FAULT_SET_HINDEX(hstate_index(h)); } else { ptep = huge_pte_alloc(mm, address, huge_page_size(h)); if (!ptep) return VM_FAULT_OOM; } mapping = vma->vm_file->f_mapping; idx = vma_hugecache_offset(h, vma, address); hash = hugetlb_fault_mutex_hash(h, mm, vma, mapping, idx, address); mutex_lock(&hugetlb_fault_mutex_table[hash]); entry = huge_ptep_get(ptep); if (huge_pte_none(entry)) { ret = hugetlb_no_page(mm, vma, mapping, idx, address, ptep, flags); goto out_mutex; } ret = 0; if (!pte_present(entry)) goto out_mutex; if ((flags & FAULT_FLAG_WRITE) && !huge_pte_write(entry)) { if (vma_needs_reservation(h, vma, address) < 0) { ret = VM_FAULT_OOM; goto out_mutex; } /* Just decrements count, does not deallocate */ vma_end_reservation(h, vma, address); if (!(vma->vm_flags & VM_MAYSHARE)) pagecache_page = hugetlbfs_pagecache_page(h, vma, address); } ptl = huge_pte_lock(h, mm, ptep); /* Check for a racing update before calling hugetlb_cow */ if (unlikely(!pte_same(entry, huge_ptep_get(ptep)))) goto out_ptl; page = pte_page(entry); if (page != pagecache_page) if (!trylock_page(page)) { need_wait_lock = 1; goto out_ptl; } get_page(page); if (flags & FAULT_FLAG_WRITE) { if (!huge_pte_write(entry)) { ret = hugetlb_cow(mm, vma, address, ptep, pagecache_page, ptl); goto out_put_page; } entry = huge_pte_mkdirty(entry); } entry = pte_mkyoung(entry); if (huge_ptep_set_access_flags(vma, address, ptep, entry, flags & FAULT_FLAG_WRITE)) update_mmu_cache(vma, address, ptep); out_put_page: if (page != pagecache_page) unlock_page(page); put_page(page); out_ptl: spin_unlock(ptl); if (pagecache_page) { unlock_page(pagecache_page); put_page(pagecache_page); } out_mutex: mutex_unlock(&hugetlb_fault_mutex_table[hash]); if (need_wait_lock) wait_on_page_locked(page); return ret; } 3. HugePage配置获取当前系统使用页面大小命令： getconf PAGESIZE通过/proc/meminfo查看HugePage信息： MemTotal: 16310112 kB MemFree: 586168 kB MemAvailable: 10733508 kB ... HugePages_Total: 0---------------------HugePage池中大小。 HugePages_Free: 0---------------------HugePage池中未被分配HugePage数量。 HugePages_Rsvd: 0---------------------HugePage池中承诺被分配但还未执行分配操作的HugePage数量。 HugePages_Surp: 0---------------------HugePage池中超出/proc/sys/vm/nr_hugepages。最大不超过/proc/sys/vm/nr_overcommit_hugepages。 Hugepagesize: 2048 kB ...内核可以在命令行设置hugepages和hugepagesz，分别表示HugePage页面数量和页面大小。当系统支持多种大小HugePage时，默认HugePage大小通过default_huagepaegsz指定。 3.1 命令行参数通过命令行分别设置nr_hugepages和default_hugepagesz，可以设置HugePage页面数量和大小。以及x86_64特有的配置选项。 由于__setup()在initcall()之前执行，所以下面的命令都在hugetlb_init()之前执行。 static int __init hugetlb_nrpages_setup(char *s) { unsigned long *mhp; static unsigned long *last_mhp; if (!parsed_valid_hugepagesz) { pr_warn("hugepages = %s preceded by " "an unsupported hugepagesz, ignoring\n", s); parsed_valid_hugepagesz = true; return 1; } /* * !hugetlb_max_hstate means we haven't parsed a hugepagesz= parameter yet, * so this hugepages= parameter goes to the "default hstate". */ else if (!hugetlb_max_hstate) mhp = &default_hstate_max_huge_pages;-----------如果hugepagesz没有被解析过，则hugepages解析值保存在default_hstate_max_huge_pages中；否则保存在parsed_hstate->max_huge_pages中。 else mhp = &parsed_hstate->max_huge_pages; if (mhp == last_mhp) { pr_warn("hugepages= specified twice without interleaving hugepagesz=, ignoring\n"); return 1; } if (sscanf(s, "%lu", mhp) = MAX_ORDER hstates here early to still * use the bootmem allocator. */ if (hugetlb_max_hstate && parsed_hstate->order >= MAX_ORDER)---必须满足hugetlb_max_hstate被初始化过，并且parsed_hstate->order不小于MAX_ORDER才提前分配内存。 hugetlb_hstate_alloc_pages(parsed_hstate); last_mhp = mhp; return 1; } __setup("hugepages=", hugetlb_nrpages_setup); static int __init hugetlb_default_setup(char *s) { default_hstate_size = memparse(s, &s);---------------解析default_hugepagesz值到default_hstate_size中，表示默认的Huge Page大小。后续系统可能存在多种Huge Page大小。 return 1; } __setup("default_hugepagesz=", hugetlb_default_setup); static __init int setup_hugepagesz(char *opt) { unsigned long ps = memparse(opt, &opt);--------------x86_64特有属性值。 if (ps == PMD_SIZE) { hugetlb_add_hstate(PMD_SHIFT - PAGE_SHIFT); } else if (ps == PUD_SIZE && boot_cpu_has(X86_FEATURE_GBPAGES)) { hugetlb_add_hstate(PUD_SHIFT - PAGE_SHIFT); } else { hugetlb_bad_size(); printk(KERN_ERR "hugepagesz: Unsupported page size %lu M\n", ps >> 20); return 0; } return 1; } __setup("hugepagesz=", setup_hugepagesz); 3.2 配置节点内核每一个不同尺寸的Huge Page都有一对应的目录：/sys/kernel/mm/hugepages/hugepages-*kB/。包含如下文件节点： nr_hugepages nr_hugepages_mempolicy nr_overcommit_hugepages free_hugepages resv_hugepages surplus_hugepages nr_hugepages(读写)系统运行起来后，可以通过/proc/sys/vm/nr_hugepages设置，系统根据实际情况分配或释放HugePages。 当增加nr_hugepages之后，系统优先使用surplus中页面。然后才会分配新的Huge Page来满足需求。 当减小nr_hugepages，导致使用中页面大于nr_hugepages时，将使用中页面转换成surplus页面。 当减小nr_hugepaes，导致用中页面大于nr_hugepages+nr_overcommit_hugepages时，同样会将超出nr_hugepages的页面转成surplus页面。直到nr_hugepages+nr_overcommit_hugepages足够大，或者释放足够多的surplus页面，否则不会继续申请surplus页面。 free_hugepages(只读)表示系统中persistent Huge Page页面数量。 resv_hugepages(只读)表示已经被分配但是未被实际使用的Huge Page数量。 surplus_hugepages(只读)使用中的overcommit Huge Page页面数量。 nr_overcommit_hugepages(读写)系统允许的最大overcommit页面数量。 表示当当前系统可以从HugePage池中分配超过nr_hugepages数量的HugePage数。这些页面被称为surplus Huge Pages，当这些页面不被使用后，可以被释放返回给系统。 HugePage为2MB情况下，分别设置nr_hugepages=128、nr_overcommit_hugepages=128。分别通过mmap申请100MB、300MB、512MB后关系如下： Item nr_hugepages free_hugepages resv_hugepages nr_overcommit_hugepages surplus_hugepages 初始值 128 128 0 128 0 100MB 128 78 0 128 0 300MB 150 0 0 128 22 512M 256 0 0 128 128 hugepages_treat_as_movable分配的Huge Page页面将具备__GFP_MOVABLE标志。 4. HugePage优缺点使用HugePage的优点： 系统使用HugePage则内存页数量会减少，从而需要更少的页表，节约了页表所占用的内存数量。 所需的地址转化也减少了，TLB缓存失效的次数也减少了，从而提高内存访问的性能。 地址转换所需信息一般保存在CPU缓存中，HugePage使用让地址转换信息减少，减少了CPU缓存的使用。 HugePage页面是不支持swap的，所以没有page table lookups。所以大内存情况下，kswapd也不会频繁被调用。当然HugePage在某些场景下也存在缺点： 当申请一块大内存，但是使用内存并不多，比如：每个2MB，写4KB内容。使用HugePage就会导致实际占用的物理内存相对于4KB页面大很多。 5. HugePage使用有两种方式使用HugePage：mmap和SYSV共享内存，其中mmap可以有名映射或者匿名映射。 共享内存和mmap通过MAP_HUGETLB使用HugePage是不需要挂载HugePage文件系统的。 通过libhugetlbfs可以对HugePage进行扩展，更方便使用。 5.1 mmap 5.1.1 mmap有名映射HugePage挂载HugePage文件系统 mount none /mnt/huge -t hugetlbfs使用如下代码创建huge/hugepagefile文件，然后使用256M映射： #include #include #include #include #include #define FILE_NAME "huge/hugepagefile" #define LENGTH (256UL*1024*1024) #define PROTECTION (PROT_READ | PROT_WRITE) /* Only ia64 requires this */ #ifdef __ia64__ #define ADDR (void *)(0x8000000000000000UL) #define FLAGS (MAP_SHARED | MAP_FIXED) #else #define ADDR (void *)(0x0UL) #define FLAGS (MAP_SHARED) #endif static void check_bytes(char *addr) { printf("First hex is %x\n", *((unsigned int *)addr)); } static void write_bytes(char *addr) { unsigned long i; for (i = 0; i < LENGTH; i++) *(addr + i) = (char)i; } static int read_bytes(char *addr) { unsigned long i; check_bytes(addr); for (i = 0; i < LENGTH; i++) if (*(addr + i) != (char)i) { printf("Mismatch at %lu\n", i); return 1; } return 0; } int main(void) { void *addr; int fd, ret; fd = open(FILE_NAME, O_CREAT | O_RDWR, 0755); if (fd < 0) { perror("Open failed"); exit(1); } addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, fd, 0); if (addr == MAP_FAILED) { perror("mmap"); unlink(FILE_NAME); exit(1); } printf("Returned address is %p\n", addr); check_bytes(addr); write_bytes(addr); ret = read_bytes(addr); sleep(10); munmap(addr, LENGTH); close(fd); unlink(FILE_NAME); return ret; }输出如下： Returned address is 0x7f2d8ba00000 First hex is 0 First hex is 3020100查看进程maps如下： ... 7f2d8ba00000-7f2d9ba00000 rw-s 00000000 00:9b 10940003 /home/al/hugepage/huge/hugepagefile ...查看文件系统： -rwxr-xr-x 1 root root 258M 11月 29 23:06 hugepagefile 5.1.2 mmap匿名映射HugePage代码如下： #include #include #include #include #include #define LENGTH (256UL*1024*1024) #define PROTECTION (PROT_READ | PROT_WRITE) #ifndef MAP_HUGETLB #define MAP_HUGETLB 0x40000 /* arch specific */ #endif /* Only ia64 requires this */ #ifdef __ia64__ #define ADDR (void *)(0x8000000000000000UL) #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB | MAP_FIXED) #else #define ADDR (void *)(0x0UL) #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB) #endif static void check_bytes(char *addr) { printf("First hex is %x\n", *((unsigned int *)addr)); } static void write_bytes(char *addr) { unsigned long i; for (i = 0; i < LENGTH; i++) *(addr + i) = (char)i; } static int read_bytes(char *addr) { unsigned long i; check_bytes(addr); for (i = 0; i < LENGTH; i++) if (*(addr + i) != (char)i) { printf("Mismatch at %lu\n", i); return 1; } return 0; } int main(void) { void *addr; int ret; addr = mmap(ADDR, LENGTH, PROTECTION, FLAGS, 0, 0); if (addr == MAP_FAILED) { perror("mmap"); exit(1); } printf("Returned address is %p\n", addr); check_bytes(addr); write_bytes(addr); ret = read_bytes(addr); sleep(10); /* munmap() length of MAP_HUGETLB memory must be hugepage aligned */ if (munmap(addr, LENGTH)) { perror("munmap"); exit(1); } return ret; }输出如下： Returned address is 0x7ff600200000 First hex is 0 First hex is 3020100查看进程的maps如下： ... 7ff600200000-7ff610200000 rw-p 00000000 00:0f 10940472 /anon_hugepage (deleted) ... 5.2 SYSV共享内存使用HugePage代码如下： #include #include #include #include #include #include #include #include #ifndef SHM_HUGETLB #define SHM_HUGETLB 04000 #endif #define LENGTH (256UL*1024*1024) #define dprintf(x) printf(x) /* Only ia64 requires this */ #ifdef __ia64__ #define ADDR (void *)(0x8000000000000000UL) #define SHMAT_FLAGS (SHM_RND) #else #define ADDR (void *)(0x0UL) #define SHMAT_FLAGS (0) #endif int main(void) { int shmid; unsigned long i; char *shmaddr; shmid = shmget(0x12345678, LENGTH, SHM_HUGETLB | IPC_CREAT | SHM_R | SHM_W); if (shmid < 0) { perror("shmget"); exit(1); } printf("shmid: %d\n", shmid); shmaddr = shmat(shmid, ADDR, SHMAT_FLAGS); if (shmaddr == (char *)-1) { perror("Shared memory attach failure"); shmctl(shmid, IPC_RMID, NULL); exit(2); } printf("shmaddr: %p\n", shmaddr); dprintf("Starting the writes:\n"); for (i = 0; i < LENGTH; i++) { shmaddr[i] = (char)(i); if (!(i % (1024 * 1024))) dprintf("."); } dprintf("\n"); dprintf("Starting the Check..."); for (i = 0; i < LENGTH; i++) if (shmaddr[i] != (char)i) { printf("\nIndex %lu mismatched\n", i); exit(3); } dprintf("Done.\n"); sleep(10); if (shmdt((const void *)shmaddr) != 0) { perror("Detach failure"); shmctl(shmid, IPC_RMID, NULL); exit(4); } shmctl(shmid, IPC_RMID, NULL); return 0; }执行结果如下： shmid: 32407590 shmaddr: 0x7f1fc2c00000 Starting the writes: ................................................................................................................................................................................................................................................................ Starting the Check...Done.查看进程maps如下： ... 7f1fc2c00000-7f1fd2c00000 rw-s 00000000 00:0f 32407590 /SYSV12345678 (deleted) ...共享内存使用情况如下： ------ Shared Memory Segments -------- key shmid owner perms bytes nattch status ... 0x12345678 32407590 root 600 268435456 1 5.3 mmap、SYSV共享内存异同mmap有名和匿名，以及SysV共享内存都使用内核中HugePage。 有名mmap需要借助hugetlbfs文件系统；匿名mmap和SysV共享内存只需要使用特殊标志位(MAP_HUGETLB/SHM_HUGETLB)。 有名mmap和SYSV共享内存都可以跨进程访问；匿名mmap只能本进程访问。 5.4 libhugetlbfs做回归测试源码： https://github.com/libhugetlbfs/libhugetlbfs《HOWTO》对libhugetlbfs做了详细介绍： 通过libhugetlbfs对使用hugetlbfs提供了一套方便的应用程序接口；使用libhugetblfs替代目前库中malloc()函数，使内存分配在HugePage上进行；libhugetlbfs能使进程test/data/bss段在HugePage上分配。 支持libhugetlbfs的硬件、内核、工具链、配置。 如何编译安装libhugetlbfs。 如何使用libhugetlbfs：替代malloc()、共享内存、进程text/data/bss段。安装libhugetlgfs： sudo apt-get install libhugetlbfs libhugetlbfs-tests建立挂载点： sudo mount none /home/al/hugepage/huge -t hugetlbfs使用hugeadm查看挂载情况： hugeadm --list-all-mounts： libhugetlbfs: ERROR: Line too long when parsing mounts Mount Point Options /dev/hugepages rw,relatime,pagesize=2M /home/al/hugepage/huge rw,relatime,pagesize=2M hugeadm --pool-list： libhugetlbfs: ERROR: Line too long when parsing mounts Size Minimum Current Maximum Default 2097152 512 512 512 * 1073741824 0 0 0使用如下脚本进行测试： sudo /usr/lib/libhugetlbfs/tests/run_tests.py执行结果如下： run_tests.py: The 32 bit word size is not compatible with 2M pages zero_filesize_segment (2M: 64): PASS test_root (2M: 64): PASS meminfo_nohuge (2M: 64): PASS gethugepagesize (2M: 64): PASS gethugepagesizes (2M: 64): PASS HUGETLB_VERBOSE=1 empty_mounts (2M: 64): PASS HUGETLB_VERBOSE=1 large_mounts (2M: 64): PASS find_path (2M: 64): PASS unlinked_fd (2M: 64): PASS readback (2M: 64): PASS truncate (2M: 64): PASS shared (2M: 64): PASS mprotect (2M: 64): PASS mlock (2M: 64): PASS misalign (2M: 64): PASS ptrace-write-hugepage (2M: 64): PASS icache-hygiene (2M: 64): PASS slbpacaflush (2M: 64): PASS (inconclusive) straddle_4GB_static (2M: 64): PASS huge_at_4GB_normal_below_static (2M: 64): PASS huge_below_4GB_normal_above_static (2M: 64): PASS map_high_truncate_2 (2M: 64): PASS misaligned_offset (2M: 64): PASS (inconclusive) truncate_above_4GB (2M: 64): PASS brk_near_huge (2M: 64): brk_near_huge: malloc.c:2401: sysmalloc: Assertion `(old_top == initial_top (av) && old_size == 0) || ((unsigned long) (old_size) >= MINSIZE && prev_inuse (old_top) && ((unsigned long) old_end & (pagesize - 1)) == 0)' failed. ... 6. 性能对比构建测试用例：分别在2MB HugePagemmap()和4K页面内存上映射256M内存，然后每隔4KB写一个字节，再读出进行验证。最后munmap()解除映射。 如此确保每个256M空间每个页面都会被申请到，其中HugePage内存每隔2MB才会发生缺页异常；4K页面每次都会发生缺页异常，总量是2MB的512倍。 #include #include #include #include #include #include #define PAGE_4K (0x1000) #define LENGTH (256UL*1024*1024) #define PROTECTION (PROT_READ | PROT_WRITE) #ifndef MAP_HUGETLB #define MAP_HUGETLB 0x40000 /* arch specific */ #endif #define ADDR (void *)(0x0UL) #define FLAGS_HP (MAP_PRIVATE | MAP_ANONYMOUS | MAP_HUGETLB) #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS) static void write_bytes(char *addr) { unsigned long i; for (i = 0; i < LENGTH/PAGE_4K; i++) *(addr + PAGE_4K*i) = (char)i; } static int read_bytes(char *addr) { unsigned long i; for (i = 0; i < LENGTH/PAGE_4K; i++) if (*(addr + PAGE_4K*i) != (char)i) { printf("Mismatch at %lu\n", i); return 1; } return 0; } long int mmap_perf_test(int flags) { void *addr; int ret; struct timespec time_start, time_end; long int duration = 0; clock_gettime(CLOCK_REALTIME, &time_start); addr = mmap(ADDR, LENGTH, PROTECTION, flags, 0, 0); if (addr == MAP_FAILED) { perror("mmap"); exit(1); } write_bytes(addr); ret = read_bytes(addr); /* munmap() length of MAP_HUGETLB memory must be hugepage aligned */ if (munmap(addr, LENGTH)) { perror("munmap"); exit(1); } clock_gettime(CLOCK_REALTIME, &time_end); duration = (time_end.tv_sec - time_start.tv_sec)*1000000000 + (time_end.tv_nsec - time_start.tv_nsec); return duration; } int main(int argc, char** argv) { long int ret_hp = 0, ret = 0; float percentage = 0.0; if(argc != 2) return -1; int count=atoi(argv[1]); for(int i = 0; i < count; i++) { ret_hp = mmap_perf_test(FLAGS_HP); ret = mmap_perf_test(FLAGS); percentage = (float)ret_hp/(float)ret*100.0; printf("%d, %ld, %ld, %f\n", i+1, ret_hp, ret, percentage); } return ret; }分别进行1次和连续50次对比如下： al@al-B250-HD3:~/hugepage$ ./cmp_hugepage 1 1, 19186196, 81868224, 23.435461 al@al-B250-HD3:~/hugepage$ ./cmp_hugepage 1 1, 45560431, 83335020, 54.671406 al@al-B250-HD3:~/hugepage$ ./cmp_hugepage 1 1, 17648359, 82351069, 21.430639 al@al-B250-HD3:~/hugepage$ ./cmp_hugepage 1 1, 43837351, 83531347, 52.480125 al@al-B250-HD3:~/hugepage$ ./cmp_hugepage 1 1, 45677763, 83840517, 54.481728可以看出只执行1次，HugePage上耗时不太稳定。耗时可能是20%或50%左右。(原因细节未继续跟进) al@al-B250-HD3:~/hugepage$ ./cmp_hugepage 50 1, 18256274, 81718710, 22.340384 2, 15377806, 82897401, 18.550407 3, 14953090, 81918232, 18.253677 ... 48, 15206444, 83194584, 18.278166 49, 15137777, 85130700, 17.781807 50, 15088148, 83927648, 17.977566当执行50的时候，第1次可能是20%或50%，但是后面基本在20%左右。 所以说在本Case下，最坏情况HugePage领先4K 50%，最好领先80%左右。 通过读取trace event /sys/kernel/debug/tracing/events/exceptionspage_fault_user，可以看出缺页异常次数对比。 当执行256M 4KB页面，内核do_page_fault()次数为： cat /sys/kernel/debug/tracing/trace | grep 0x4006cd | wc -l 65536当使用HugePage后，内核do_page_fault()次数为： cat /sys/kernel/debug/tracing/trace | grep 0x4006cd | wc -l 128其中0x4006cd 是写内存的地方： static void write_bytes(char *addr) { 4006ac: 55 push %rbp 4006ad: 48 89 e5 mov %rsp,%rbp 4006b0: 48 89 7d e8 mov %rdi,-0x18(%rbp) unsigned long i; for (i = 0; i < LENGTH; i++) 4006b4: 48 c7 45 f8 00 00 00 movq $0x0,-0x8(%rbp) 4006bb: 00 4006bc: eb 16 jmp 4006d4 *(addr + i) = (char)i; 4006be: 48 8b 55 e8 mov -0x18(%rbp),%rdx 4006c2: 48 8b 45 f8 mov -0x8(%rbp),%rax 4006c6: 48 01 d0 add %rdx,%rax 4006c9: 48 8b 55 f8 mov -0x8(%rbp),%rdx 4006cd: 88 10 mov %dl,(%rax) 7. 参考文档 《Linux hugepage使用与实现》 《Hugepage介绍以及实践》 《hugepage总结》 《hugepage的优势与使用》 《HugeTLB Pages》 《Linux Hugetlbfs内核源码简析-----(一)Hugetlbfs初始化》 《Linux Hugetlbfs内核源码简析-----(二)Hugetlbfs挂载》 |
【本文地址】
公司简介
联系我们